 |
 |
 |
|
This Polyester self-adhesive, pre-punched Suspension carrier tape strip / Bande de suspension is used in the following systems: Planhold 506AR1, PiCo MF4, Archvite, DiAZit 7056, Monarch, Gabs, Kind, Elite, Suspendex, Ozaplan Vio, Agepa, Nestler, Vistaplan, Norman Wade Vertiplan, Plankenhorn, Multiprong, Vertiplan, Norman Wade Vertiplan Plus and Multiplan. Holes are 60mm apart and the suspension strip roll is 45mm x 50m M512 Roll of 50 meter (1 1/8"W) Polyester Carrier Strips Eliminate fingerprint smudges or dog-eared corners with self-adhesive carrier strips.
Each Carrier can be cut into 24", 30" and 36" strips
UPSable: Yes
Material(s): Polyester
Dimensions: 0.005"w x 1 1/8"d x 1968"L
Weight: 2.5 lbs
- Bandes de suspension Planhold , Archvite, Monarch, Gabs, Kind, Elite, Suspendex, Ozaplan Vio, Agepa, Nestler, Vistaplan, Norman Wade Vertiplan, Plankenhorn, MultiprongAgepa,Elite, Unic Presspahn
- Bandes auto-adhésives livrées en rouleau de 50 m. Pour lutilisation optimale des meubles. Planhold, Agepa ect.. 60 mm Oblong Disponible en PVC blanc - 150 microns
|
Suspension Strip application instructions.
Simple to apply Suspension Strips are attached to your documents before
the document is being suspended in your vertical filing cabinet. To
apply, peel of the adhesive protection off of the suspension strips and
stick the strip along the top of the document being hung. Please note
that Strips will support up to 1lb in document weight or two sheets.
Manufactured to carry heavy loads the strips will not tear or become
brittle. For laminates or heavier blueprint type documents, it is
recommended two strips be used if needed, one strip attached to each
side of the document. Then place the document in the Plan File using the
pins to suspend the document in the cabinet.
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Material: Opaque strip Polyester
- Dimensions: 1-1/4" wide x 164' long
- Quantity: 1 Roll
|
|
|
|
|
|
|
