This 12 inch Equal Space 10 Point Divider also referred to as a 11 point dividers are constructed of Stainless Steel. The divider is used in form design, development of models, textile design, etc. The eleven point divider plots 11 equally spaced points. The 11 numbered “teeth” will always divide the distance between the teeth marked “0” into 10 equal parts. The divider will create 10 equal spaces. The equal space divider riveted pivot points expand and contract with ease, yet maintain precise settings. Satin finish stainless steel construction resists wear and corrosion.
Below are approximate specs for the 12 inch 11 point divider: Height 12”, Maximum expansion 1st point to the 11th point is approximately 19.625", Maximum space between two consecutive points is approximately 2”. Great tool for creating 10 equal parts or 11 equal points.
Made in Germany

How to use Equal Space 10 Point Divider.... See Technical Instructions tab.

• How to use an Equal Space 10 Point Divider:
• A divider is a tool used to compare sizes of drawing elements. The ends of a divider are placed on a section of a drawing or against the scale of a ruler. The divider is a tool for comparing sizes, dividing line segments, and measuring distances on drawings. An Equal Space 10 Point Divider is used to divide a fixed length into up to 10 equal spaces. Place the first teeth marled (0) at the starting point of the desired distance being divided and the respective number (1-9 or 0 for ten, meaning the times being divided ect.). The distance between the points will be equal and they represent the measurement that is needed to divide that given length equally into the respective number (1-9 or 0 for ten).